SANSUI AU 20000 Integrated Stereo Amplifier 2 X 170 WRMA Vintage 1975

SANSUI AU 20000 Integrated Stereo Amplifier 2 X 170 WRMS Vintage 1975 Work Perfect Refurbished Good Look Whatsapp: [redacted phone number] Original from the Japanese market, it works on 100 volts, is completely restored and works perfectly at 100% Sansui AU-20000 Integrated Stereo Amplifier (1975-77) Description The Sansui AU-20000 is an integrated stereo amplifier delivering a continuous 170 watts, minimum RMS, per channel, both channels driven into 8 ohms, over 20 to 20KHz bandwidth -... SANSUI AU 20000 Integrated Stereo Amplifier 2 X 170 WRMS Vintage 1975 Work Perfect Refurbished Good Look Whatsapp: [redacted phone number] Original from the Japanese market, it works on 100 volts, is completely restored and works perfectly at 100% Sansui AU-20000 Integrated Stereo Amplifier (1975-77) Description The Sansui AU-20000 is an integrated stereo amplifier delivering a continuous 170 watts, minimum RMS, per channel, both channels driven into 8 ohms, over 20 to 20KHz bandwidth - with no more than 0.05 % total harmonic distortion. Features include: Eight-transistor equaliser with differential amps at initial stage gives an improved dynamic response, for an extremely accurate RIAA equalisation curve. Triple protection circuits; temperature, DC voltage and ASO detection. Selectable phono sensitivity/impedance, and a versatile tape monitor circuit make the AU20000 flexible and capable of handling a variety of recording and playback combinations. Specifications Power output: 170 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.05% Damping factor: 80 Input sensitivity: 3mV (MM), 130mV (DIN), 130mV (line) Signal to noise ratio: 70dB (MM), 80dB (DIN), 80dB (line) Channel separation: 55dB (MM), 60dB (line) Output: 130mV (line), 30mV (DIN), 0.7V (Pre out) Speaker load impedance: 4Ω to 16Ω Dimensions: 460 x 178 x 400mm Weight: 23.6kg Year: 1976 Whatsapp: [redacted phone number] Original from the Japanese market, it works on 100 volts, is completely restored and works perfectly at 100% Sansui AU-20000 Integrated Stereo Amplifier (1975-77) Description The Sansui AU-20000 is an integrated stereo amplifier delivering a continuous 170 watts, minimum RMS, per channel, both channels driven into 8 ohms, over 20 to 20KHz bandwidth - with no more than 0.05 % total harmonic distortion. Features include: Eight-transistor equaliser with differential amps at initial stage gives an improved dynamic response, for an extremely accurate RIAA equalisation curve. Triple protection circuits; temperature, DC voltage and ASO detection. Selectable phono sensitivity/impedance, and a versatile tape monitor circuit make the AU20000 flexible and capable of handling a variety of recording and playback combinations. Specifications Power output: 170 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.05% Damping factor: 80 Input sensitivity: 3mV (MM), 130mV (DIN), 130mV (line) Signal to noise ratio: 70dB (MM), 80dB (DIN), 80dB (line) Channel separation: 55dB (MM), 60dB (line) Output: 130mV (line), 30mV (DIN), 0.7V (Pre out) Speaker load impedance: 4Ω to 16Ω Dimensions: 460 x 178 x 400mm Weight: 23.6kg Year: 1976 Show More